A new concept in Model Railroad Control.

WifiTrax Vision for your Model Railroad

Checkout our NCE CAB Bus/Wi-Fi Interface The WFD-30 module or WFD-31 module provides Wi-Fi Control of your NCE Command Station and Boosters using the popular WiThrottle and Engine Driver apps for Apple and Android as well as the TCS UWT-100 Universal Wi-Fi Throttle and WifiTrax Loco Operator app for Windows and Android.
The name NCE and the NCE logo is the property of North Coast Engineering. reproduced to identify their products. WiThrottle is the name of a communication protocol and also of an Apple app written by Brett Hoffman. Engine Driver is the name of an Android app written by M. Steve Todd.

Wi-Fi DCC - A Great Solution for Garden Railroads .

The Wifitrax battery loco concept applies our Wi-Fi/DCC concept to large scale, O gauge or HO locomotives that you might use in a garden railway. Anyone with a garden railway will know the difficulty of maintaining good electrical contact between locomotives and track after the winter weather has taken its toll. If you would like to run DCC on your garden railway locomotives you need to solve this problem even more urgently.

WifiTrax loco-based Wi-Fi DCC lets you control both your locomotives and your fixed layout features from your Tablet and Smartphone over your home Wi-Fi nework. That means you are free to walk around following your trains without any cable tethers. You can start with just one module in a loco such as WDMI-27 then later add a WFD-60 Gateway Module to form a Garden Network.

Loco-based Wi-Fi/DCC lets you use your favorite DCC decoder with or without sound in your loco, install one of our Wi-Fi/DCC Interface Modules and control your DCC Decoder over Wi-Fi from the same smartphone app.

About Wi-Fi/DCC Wi-Fi/DCC Interface Modules About Garden Railways
About Layout Controllers About Apps Read the details Get Started

Wi-Fi DCC Trackside - A Complete Low-Cost DCC Solution

If you don't need battery locomotives and are happy with track DCC, you can uses Wi-Fi DCC Trackside to control both your locomotives and your fixed layout features from your Tablet and Smartphone over your home Wi-Fi nework. That means you are free to walk around following your trains without any cable tethers.

Trackside Wi-Fi DCC is a complete DCC solution consisting of Command Stations and Boosters that can provide up to 5 Amp of contiuous DCC current with offering short circuit protection and auto-reverse. A control bus provides connection between command station and boosters.

WFD-27 is an entry-level command station/booster combined providing 5 Amp power. WFD-46 is a booster providing up to 5 Amp power, adjustable DCC voltage, short circuit protection at 3A or 5A and auto-reverse.

About Wi-Fi/DCC Wi-Fi/DCC Interface Modules Wi-Fi/DCC Trackside
About Layout Controllers About Apps Read the details Get Started

Controlling Switches etc. using Wi-Fi Layout Products .

Use the Tower Operator App to control the switches and lights on your layout

This app runs on Android or Windows 10 and allows your to control switches, lights, signals and power districts.

About the Modules About the Tower Operator App

Wi-Fi Layout Products

Click to View Details and Buy Now!

WFS-47 4-Way Wi-Fi/DCC Universal Switch Machine Controller .

Also checkout the WFS-87 for 8-way switch machine control.

Control your turnouts using the in-built web pages, your DCC Command Station or a WiThrottle app on your phone (with WFD-60). You can also use our free Tower Operator App to control four of your model railroad switches by tapping a switch symbol on the custom layout map you build on your Windows 10 or Android computer or tablet.

Works with dual coil, single coil or stall-motor switch machines.

Only needs DC power, or can use DCC or constant DC power from the track. .

WFS-47 measures 90mm x 60mm (3.54 x 2.36 inch) and mounts under your baseboard or under a building.

There are four sets of three screw terminals that are easily wired to your switch machines - either 2 or 3-wire connections.

Connect the power terminals to your track or an DC power supply.

Capacitor discharge design. .

Up to 24V capacitor charge will drive most dual coil switch machines including spring switches such as Peco.

Charge pump circuit generates up to 24V from track power.

Compatible with all Switch Machines we Know. .

Mount the WFS-47 anywhere on your layout to control a group of up to four dual-coil, single coil, stall motor or end-switch motor switch machines.

Click to View Details and Buy Now!

WFG-80 8-Way Wi-Fi Lighting and General Purpose Controller .

With this module you can use our free Tower Operator App to control eight LED or filament lamps by tapping a symbol on the custom layout map you build on your Windows 10 or Android computer or tablet. You can control single lights or group the outputs to control 2-Light or 3-Light Signals by tapping the symbol on your layout map.

Only needs DC power, or can use DCC or DC power from the track. .

WFG-80 measures 80mm x 50mm (3.15 x 1.97 inch) and mounts under your baseboard or under a building.

There are eight sets of two screw terminals that are easily wired to lights.

Connect the power terminals to your track or a DC power supply.

Dimmable in two banks. Links can select series resistor. Robust design. .

Outputs are arranged in two banks that are dimmable under Wi-Fi control - so you can select suitable brightness for 4 at a time.

Use links on board to select suitable series resistor.

Will withstand accidental short circuits on any one channel.

The WFG-80 is a Wi-Fi Light or General Purpose controller. .

Suitable for continuous low current applications such as LEDs or low power Incandescent Lamps. Mount it anywhere on your layout to control a group of up to eight lights or other low-current loads.

Wi-Fi Loco Products

Click to View Details and Buy Now!

WMH-20 Wi-Fi Loco Controller .

You can install this module in many HO scale locomotives so that you can drive them using our free Loco Operator App installed on your Android or Windows 10 phone, tablet or computer.

Suits DCC Ready Locomotive .

The WMH-20 is a harnessed Wi-Fi Loco Controller with a standard 9-pin JST connector. It measures 18mm x 33.4mm (0.71 x 1.32 inch) and easily fits into most HO Diesel Locomotives. Choose one of our standard harnesses to connect to the 8-pin DCC ready locomotive connector.

Advanced Control .

Uses motor back-emf to measure and control locomotive speed. Firmware provides advanced closed-loop control under direction from your hand-held phone or tablet with scale speed available for speedometer.

Front and Rear Light Control .

Front and rear lights may be turned on or off from your Hand-Held Device. Auto mode turns correct light on as Loco moves.

Click to View Details and Buy Now!

WMR-10 Wi-Fi Loco Controller .

You can install this module in many HO scale locomotives so that you can drive them using our free Loco Operator App installed on your Android or Windows 10 phone, tablet or computer.

Easily fitted .

The WMR-10 is a board replacement Wi-Fi Loco Controller that fits many Atlas, Athern and Kato locomotives. It measures 18mm x 76.5mm (0.71 x 3.01 inch) and clips into locomotive replacing the existing board. Wires within the locomotive can be clipped or soldered onto the tabs.

Advanced Control .

Uses motor back-emf to measure and control locomotive speed. Firmware provides advanced closed-loop control under direction from your hand-held phone or tablet with scale speed available for speedometer.

Front and Rear Light Control .

Front and rear lights may be turned on or off from your Hand-Held Device. Auto mode turns correct light on as Loco moves.

Application notes and tutorials

Detailed guidance and a tips for using our products.